代友出9.99新ECOSSE ES4.45 Bi-Wire 2*4双线分音喇叭线1对/2米每边（已出）和ECOSSE大红美标电源线1.5米|二手器材交流 - 三越音响论坛

只看楼主倒序阅读 0 发表于: 2014-08-13

吾友7月初从英国直购的全新ECOSSE艺康斯ES4.45 Bi-Wire 2*4双线分音喇叭线1对/2米因使用一个月后感觉与系统声音不对路，决定出让另换喇叭线，此版本为英国代理商专业工匠用ES4.45散线和原厂插头加工制作的，直接报成交价1270元，运费到付，可淘宝交易，重庆本地自提优先，联系方式旺旺：步月斋主。
资料介绍：

ES4.45 Biwire Loudspeaker Cable
Ecosse stands apart in regards to the appropriate conductors one should use in a biwire combination. (ES2.23+ MULTISTRAND + CS2.15 SOLIDCORE)
Our extensive R & D confirms that a mix of multi-stranded and solidcore conductors offer greater dynamics, more extended bandwidth at frequency extremes, and the finest of detail. Our competitors fail to understand the obvious advantages of using both multi-stranded AND solid core conductors in a bi-wire configuration (they tend to use 2 x the same multi-stranded cable resulting in a rather sluggish sound).
For systems offereater clarity and dynamics, we offer the superb mid/hi-end biwire set-up ES4.45, which employs separate multi-strand and solidcore conductors- in separate sheaths. With the ES2.23+/CS2.15 (or ES4.45 bi-wire), our ES2.23+ multistrand cable drives the bass/mids and is the perfect match with the CS2.15 solidcore, driving the tweeters. Here we introduce a large perfectly round solidcore conductor-our, so-called, CS2.15 'speaker cable'.
The CS2.15 is a quality; full bandwidth loudSpeaker cable sometimes necessary when we acknowledge that some amplifier/loudspeaker combinations, while exhibiting many strengths, may suffer well documented slight upper-mid glare and treble edginess (and/or over-emphasised bass). The greater strengths of its 1.5 sq mm perfectly circular solidcore conductors provide the solution to this problem.
The occupation area for the mid and high frequency signals in a solidcore conductor is greater than a stranded conductor of similar X-section, therefore resistance is reduced and delivery of high frequency information is improved and even extended. Low DC resistance meanwhile maintains low frequency extension and control, presenting it with weight, speed and perfect pitch accuracy. The result is an improved sense of ambience and larger soundstage; vocals are clearer with real presence and natural breath tones; glare and edginess give way to a sweeter and more detailed treble.
A loudspeaker consists of two drive units. - a high-frequency (HF) unit (tweeter), and a low frequency (LF) unit (woofer) they employ a "cross-over network" to direct low signal frequencies to the woofer, and high frequencies to the tweeter. This set up enables the loudspeaker to be bi-wired.
In a biwire configuration 2 pairs of speaker cables are employed in order to ensure that the signals for the tweeter and woofer are sent by separate routes. Here, the cables feeding the higher frequencies (H.F.) are not affected by electromagnetic interference from the low frequency signals (L.F.), which are carried in separate conductors.Biwiring Advantages
Using a [url=]biwiring configuration[/url] the net effect is a reduction in impedance seen by the amplifier; load is reduced and frequency response increased. The upshot of which is a genuine extension of soundstage and dynamics.
This combination has won numerous 5-STAR/BEST of TEST/ULTIMATE GUIDE AWARDS
The ES4.45 is available ex factory pre-terminated and in nylon webbing- to keep the cables tidy. It represents our no-compromise, quality performance biwire cable set.
Suitable for both biwiring and bi-amping. In a tri-wire or tri-amp set-up, we recommend the ES2.3 driving the bass units and 2 runs of CS2.15, one driving the mid units and one driving the treble units for ultimate bandwidth extension and presence.
Cable sheathed in BLACK nylon braid for tidy installation. May be configured 2-to-4 or 4-to-4 and terminated in z/x copper bananas or spades.

Technical Specifications:
CS2.15
Perfectly circular Ultra Hi-Purity-OFC™ solidcore conductors
Superior low-loss PP dielectric insulation
1.76mm sq conductor x-section for treble extension
Cotton fibre and paper tape acoustic damping
7.5mm o/d circular soft PVC jacket

ES2.23+
Ultra Hi-Purity-OFC™ multistranded conductors
Superior low-loss PP dielectric insulation
Rope-lay twisted pair configuration
3.00mm sq. conductor x-section for bass/lower mid extension
Cotton paper and yarn filled
9.5mm circular o/d soft PVC jacket

为了获得更佳的透明度和动态范围，ECOSSE建议使用双线分音的ES4.45。它由多股的ES2.3和单支的CS2.15组成，这两个型号均享誉多年，获取无数奖项。其中ES2.3负责中低频部分，CS2.15负责高频部分。ES4.45有 “2 -> 4”和“4 -> 4”两种形式。使用了ES4.45可以改善临场感并获得更宽广的音场，人声更甜美细致，声像的边缘也更加清晰。

[attachment=112104]

[attachment=112105]
[attachment=112106]

[ edit_post ]


	http://www.sanyue.net/bbs 访问内容超出本站范围，不能确定是否安全


	关闭您还没有登录，快捷通道只有在登录后才能使用。立即登录还没有帐号？赶紧注册一个

帖子

代友出9.99新ECOSSE ES4.45 Bi-Wire 2*4双线分音喇叭线1对/2米每边（已出）和ECOSSE大红美标电源线1.5米 [复制链接]