介绍一下我的系统 [复制链接]

是的，其实箱子和环境不同，调校的趋向就不同了。
我自己有四对箱子，还是可以基本搞平衡的。

仁兄，之前跟你說過小弟最近認識了一位德國朋友，這位兄台喜歡DIY線材玩，並有時在德國Ebay網站上出售，小弟向他購買了兩對訊號線，一對EMT線，一對NEUMANN線，小弟先上一些資料給兄與各位同好參考

EMT訊號線
Genuine EMT-Cable in excellent quality made of expensive materials in vintage-style, recent production. Develloped to be used with professinal mixing consoles, broadcast-record-players, transformer and tube equippment MADE IN GERMANY or SWISS QUALITY. Few enthusiasts use EMT-cables for High End in their living room or private mid-class audio to get excellent reproduction of music, natural sound and some charme of professional HIGH-CLASS equippment - very successful.
Better than magazine-tested shiny high price cables

NEUMANN訊號線

Here some copies about comparing , testing EMT and NEUMANN cables XLR


Many thanks for your kindness and generosity.
I hope that the cables will feel good in my system.
BTW,I enjoyed the pictures that you sent me.I have never heard of speakers that give 120 db(your Studers) for 1 watt at 1 meter!
I do have a pair of JBL wooden horns that are 110 db efficient with the Altec 288C compression drivers.
But,my neighbors complain when I listen to one JBL for my mono LPs.
I have many mono LPs and enjoy them with my EMT 950 set to the mono position for the output.The TSD-15 handles the mono LPs surprisingly well.
Raanan

1st impression:

Of course,I was unable to restrain my curiosity,and after a few minutes(!) with the Neumanns I connected the EMT Barcos.
The Neumann cables have a vintage sound-probably emphasizing the mids,with soft bass and a slight lack of high frequencies,but,all the same,very quick-which is rare in vintage cables.
They will be more suitable in a full range sustem.As I am using an electronic crossover,at first impression,the EMT Barco cables sound more suitable.
I will give both  cables more time in the system,although I would be willing to bet on the EMT at this stage as being more suitable.
Best,Raanan


Am listening to the Neumann.The place of my speakers makes an enormous difference-a change of 1 centimeter changes the sound.I moved the speakers 30 centimetrs away from the wall,they are now about 1.5 meters from the wall.The sound is fantastic-natural and beautiful.
Interesting how the sound will change still.
Raanan


I can not believe the sound coming from my system now-the closest to live music,and definitely not a hifi sound.
I imagine that the sound will still change as the cables break in.I am very happy,and am indebted to you for your help and recommendations.
Raanan


There was a time that I made many interconnects for myself using Klotz microphone cable with Neutrik RCA connections-really not bad,even though it cuts the high frequencies.After that I used Furukawa,also not bad,but too thin sounding.
Then,unfortunately,I had no alternative than to use audiophile cables,but I always suspected that all of them were sound processors that changed the balance of frequencies.The best interconnects that I have found until now were DPA Black Slink-but the bass is a bit weak compared to the extended highs and accurate mids.
The Neumann cables allow me to get the speakers out into the room,which makes a giant difference.
Raanan

knew that my speakers would sound best far into the room,but with all the different cables that I used until now,the sound was too thin and lacking weight.The Neumann cables are the first that allow me to get the speakers far from the wall with great natural sound.I will use the no-name with the solder that you sent me,maybe first with RCA.There is more than enough solder to use for XLR connections too,if the RCAs sound promising.
Many thanks,Raanan

仁兄，小弟現在還欠CD機還沒搬回深圳家裏，過機天就能開聲，到時可以慢慢折騰，呵呵
另最近小弟又在二手店進了一對線材及一電源濾波拖扳，最近可是十分熱沖於購買HIFI器材，呵呵

Edward，难得你这样热心。
我一直没有回帖，不过我一直在看。
我看了EMT和Neumann的介绍。听感和我有些区别。不过这和系统搭配有关的。并且和设计者的原有意图有关。
希望你早日安顿下来，可以读读你的听感。53年的大盾霉屏，焊屏荷兰ECC83，还有你收的那个CV575。
我其实也没闲着，只是想一个人安静一下。
朋友的给我的脚架，我反复调整了，还是用不上，再换塑料凳，总体真是好些，但是我总算明白了塑料凳的问题。的确是不干净。最后我上了自己DIY的木凳，暂时比前两者都好。通过这次折腾，我对脚架的理解真是加深了好多，最大的收获是摆味，对我的房间的特性了解更深了。音箱离开前墙的距离稍微有些谱了。有机会把BK的声学系统带回家，再测测，客观数据毕竟重要。
最高兴的是，我的一个好友他的系统声音大大前进了一步，按照他讲是决定性的，把整个系统的风格和声音的平衡变成他想要的了。当然这离不开我的帮助。其实我也是犹豫了好久，因为不是常规的更换，是用6SL7换6SN7。大方向对头了，我们都很高兴，因为基础不好，其他都是浪费了。
我现在感觉有时发言真是很难。上次我听了朋友的系统用小架子承放喇叭线，去掉后，竟然高频变得很毛了（变化大的无法想象），但是在我的系统上竟然没有丝毫变化。所以有时听感的问题，真是很难讲。说真的，除了管子，其他的东西我真是把握不大。不同的搭配和环境还有听感都是决定性的。可能只有放到自己的系统，AB切换，并且对系统的理解很透彻才能下结论。
我近来很少收管了，但还是看。我大该是一年前开始的，现在一些常用管的价格涨得太快，以X7U7T7，E88CC，GZ34最甚。我看了一些交易记录，感觉和我类试的朋友很多，现在懂管的人多了好多，不过有时自己都没机会了。呵呵，Valvo的长屏X7和U7涨都最快，丹麦焊屏是疯狂，短屏的金狮不谈也罢，看来我是没机会了。不过我真是很好奇金狮的表现，我昨天又试了，用了两级GEC（整流和阴极输出），B厂短屏GEC、MARCONI无论如何全面输给了R厂长屏。难道金狮真是这样神奇？不知你是否听过？
另外，我用两级GEC后竟然发现动态超强，比我用X7换U7的动态变化还要大，但是在我的系统上，两级GEC的音色非常特别，总是不习惯。

呵呵，小弟這幾天看到兄在線上但不發言，還以為兄退燒不玩了！
最近我也很少在Ebay上淘管子，不太留意行情，但如Valvo長屏X7，U7與丹麥焊屏瘋狂漲价，那就要怪仁兄與Eric老師了，呵呵！(說笑，說笑)
小弟最近認識了不少HIFI高手，感覺對玩HIFI與對音樂的理解，認識加深不少，以前小弟與兄一樣主要著重於膽管更換以提供聲音變化，現更著重於整體配合(小至腳釘，大至器材更換配合)

Hello Edward,
The Neumann and EMT cables have been shipped to Your adress.
Direction is indicated by arrow and give cables at least 24-7 or better 24-21 days break in.
To give You a better value I put an EXTRA  2x 1.25m EMT wires
but without plugs/connectors and also some
SPECIAL-FLUX-TIN from german cables devellopping factory.
You can give it to audio shop to
solder plugs to the EMT wires but only with SPECIAL TIN and sell local.
Best regards
Reinhard

呵呵，小弟的EMT及NEUMANN線材巳在運送途中，小弟還要感謝莱因哈德先生還送小弟一對EMT線材及FLUX錫線與小弟，這個"value"實在不錯，多謝多謝，呵呵

還是在仁兄的貼裏再研究線材問題