论坛风格切换
发帖 回复
返回列表
  • 3637阅读
  • 3回复

KT90 [复制链接]

 上一主题 下一主题
5881a
初来乍到
 
只看楼主 倒序阅读 0 发表于: 2007-04-23
— 本帖被 sanyue 从 动手一族和玩家 show 移动到本区(2010-01-10) —
 

 

 

 

 

 

 

KT90 is a beam-power pentode primarly designed for use in audio frequency power amplifier applications. Anode dissipation rate is 50W, which provides for push-pull amplifiers utilization up to 110W output per pair, with 550V on the anode. Up to 160W per pair may be achieved with anode voltage of 750V and screen grid voltage of 600V.

KT90 is recommended as a replacement for 6550, 6550A and KT88.

Key Benefits

  • power output
  • vastly increased anode and screen grid maximum voltages
  • low distorsion
  • extended tube life

General Characteristics

Heater voltage AC or DC 6,3 ± 0,6 V

Heater Current 1,6 A
Direct interelectrode capacitances  
     G1 to  A 1,8 pF
     G1 to (H+C+G2+BF+A) 29,0 pF
     A to (H+C+G2+BF+G1) 10,0 pF
Mounting position any
Envelope glass
Base universal
octal 8-pin

 

PIN No.

Connection
1 -
2 Heater
3 Anode
4 Grid No. 2 (screen)
5 Grid No. 1
6 -
7 Heater
8 Cathode & Beam Former

 

Maximum ratings (absolute)

Pentode Connection

Triode Connection

UA 750 V 600 V
UG2 650 V -
UA-UG2 650 V 600 V
-UG1 200 V 200 V
PA (dissipation) 50 W 50 W
PG2 8 W -
PA+G2 54 W -
IC 230 mA 230 mA
Uc-f (total DC) 300 V 300 V

Characteristics using 250V "B+" as a guide

Average characteristics, pentode connection

UA 250 V 400 V
UG2 250 V 300 V
-UG1 14 V 27 V
IA 145 mA 90 mA
IG2 8 mA 4,7 mA
-UG1 (IA=1 mA approx.) 36 V 42 V
gm 14 mA/V 8,8 mA/V
Ri (approx.) 11 kOhm 25 kOhm

Average characteristics, triode connection

UA,UG2 250 V
-UG1 14 V
IA+G2 153 mA
IG2 8 mA
gm 15 mA/V
Ri (approx.) 650 Ohm
Amplification factor 9

 

 
爱乐永恒
回复
举报
淘气的小伙子
VIP
只看该作者 1 发表于: 2007-04-23
好管子,很想买,但是没有卖了
回复
举报
音乐青年
VIP
只看该作者 2 发表于: 2007-04-28
这种管子确实不太好找了，可遇不可求。我刚刚弄了一套，味道确实不错，浓郁得很啊。

王老师辛苦了，谢谢
色本无色，只因人心带色。
音本无色，只因人心带声。
自古音无褒贬，色无优劣，致此色无界，音无律，只求一丝自我
回复
举报
淘气的小伙子
VIP
只看该作者 3 发表于: 2007-04-28
楼上的朋友在哪儿弄到的?能透露一下吗?
回复
举报
发帖 回复
返回列表
快速回复
限100 字节
 
上一个 下一个