6V6的三种推荐工作态，可以直接照搬引用 [复制链接]

上一主题下一主题查看指定楼层

5881a

初来乍到

只看楼主倒序阅读 0 发表于: 2007-02-17

— 本帖被 sanyue 从动手一族和玩家 show 移动到本区(2010-01-10) —

ampage tube data		ampage tube data

6V6 - 6V6 GT
BEAM POWER TUBE

Pin	Element
1	Shell-6V6 none-6V6GT
2	Heater (Filament)
3	Plate (Anode)
4	Screen Grid
5	Control Grid
6	none
7	Heater (Filament)
8	Cathode

Metal type 6V6 and glass
octal type 6V6-GT are used
as output amplifiers in
automobile, battery-
operated, and other
receivers in which reduced
plate-current drain is
desirable. Type 6V6-GT
may be supplied with pin
No.1 omitted. Tubes require
octal socket and may be
mounted in any position.
The 6V6 and 6V6-GT are
equivalent in performance
to type 6AQ5A.

Heater Voltage (AC/DC)	6.3	volts
Heater Current	0.45	ampere
Heater Warm-up Time (Average)	11	seconds

Peak Heater-Cathode Voltage	6V6	6V6-GT
Heater negative with respect to cathode	100 max	200 max	volts
Heater positive with respect to cathode	100 max	200 ? max

?The dc component must not exeed 100 volts.

Direct Interelectrode Capacitance (Approx.)	6V6 ?	6V6-GT
Grid No.1 to Plate	0.8	0.7	pf
Grid No.1 to Cathode, Heater, Grid No.2, and Grid No.3	10	9.0
Plate to Cathode, Heater, Grid Ho.2, and Grid No.3	11	7.5

?/B> With shell connected to cathode.

CLASS A₁ AMPLIFIER

Maximum Ratings (Design-Maximum Values)

Plate Voltage 350 max volts

Grid-No.2 (Screen-Grid) Voltage 315 max

Plate Dissipation 14 max watts

Grid-No.2 Input 2.2 max

Typical Operation

Plate Voltage 180 250 315 volts

Grid-No.2 Voltage 180 250 225

Grid-No.1 (Control-Grid) Voltage -8.6 -12.5 -18

Peak AF Grid-No.1 Voltage 8.5 12.5 18

Zero-Signal Plate Current 29 45 34 ma

Maximum-Signal Plate Current 30 47 35

Zero-Signal Grid-No.2 Current 3 4.5 2.2

Maximum-Signal Grid-No.2 Current 4 7 6

Plate Resistance (Approx.) 50000 50000 80000 ohms

Transconductance 3700 4100 3750 umhos

Load Resistance 5500 5000 8500 ohms

Total Harmonic Distortion 8 8 12 %

Maximum-Signal Power Output 2 4.5 5.5 watts

Characteristics (Triode Connection) ?/TH>

Plate Voltage 250 volts

Grid-No.1 (Control-Grid) Voltage -12.5

Amplification Factor 9.8

Plate Resistance (Approx.) 1960 ohms

Transconductance 5000 umhos

Plate Current 49.5 ma

Grid-No.1 Voltage (Approx.) for plate current of 0.5 ma -36 volts
?Grid No. 2 connected to plate.

PUSH-PULL CLASS A₁ AMPLIFIER

Maximum Ratings (Design-Maximum Values)

Plate Voltage 350 max volts

Grid-No.2 (Screen-Grid) Voltage 315 max

Plate Dissipation 14 max watts

Grid-No.2 Input 2.2 max

Typical Operation (Values are for two tubes)

Plate Voltage 250 285 volts

Grid-No.2 Voltage 250 285

Grid-No.1 (Control-Grid) Voltage -15 -19

Peak AF Grid-No.1 Voltage 30 38

Zero-Signal Plate Current 70 70 ma

Maximum-Signal Plate Current 79 92

Zero-Signal Grid-No.2 Current 5 4

Maximum-Signal Grid-No.2 Current 13 13.5

Effective Load Resistance (Plate-to-Plate) 10000 8000 ohms

Total Harmonic Distortion 5 3.5 %

Maximum-Signal Power Output 10 14 watts

Maximum Circuit Values

Grid No. 1 Circuit Resistance

For fixed-bias operation 0.1 max megohm

For cathode-bias operation 0.5 max

爱乐永恒

5881a

初来乍到

只看该作者 1 发表于: 2007-02-17

Menu

Information

6V6-GT Pinout

6V6-GT Substitutes

Close or identical	5871, 6AY5, 6P6C*, 6V6, 6V6G, 6V6GTA, 6V6GTY, 6V6Y, 7184, CV509, CV510, CV511, OSW3106, VT107, VT227, WT2100082, WTT123
Different rating or performance	7408

Warning: Substitutes are given as a guide only - please refer to original manufacturers data sheets to ensure that a substitute is safe and appropriate for your application.

6V6-GT Ratings

Vh	Ih	VaPeak	VaMax	Vg2Max	PaMax	Pg2Max	IkMax	Notes
6.3	0.45	1,200	350	315	14.0	2.2	40.0
6.3	0.45		315		10.0			Triode connection

6V6-GT Application Data

Class	Va	Vg2	Vg1	Ia	Ig2	Ra	S	Zout	Pout	THD	Notes
A S/E	315	225	-13.0	34.0	2.2	80,000	3.75	8,500	5.5	12
A S/E	250	250	-12.5	45.0	4.5	50,000	4.1	5,000	4.5
A S/E	180	180	-8.5	29.0	3.0	50,000	3.7	5,500	2.0
AB1 P/P	285	285	-19.0	70.0	4.0	70,000	3.6	8,000	14.0	3.5	Ia and Ig2 for two tubes at zero signal
AB1 P/P	250	250	-15.0	70.0	5.0	60,000	3.75	10,000	10.0		Ia and Ig2 for two tubes at zero signal

6V6-GT Data sheet links

Ampage	6V6: html
Dave Cigna''s Pages (DuncanAmps mirror)	6V6GT: html
Duncan''s Amp Pages	6V6, 6AQ5 etc.: Acrobat PDF (2 pages)
Peter Millett	6V6-GTA: Acrobat PDF 212K
N7JP Tube Database	6V6GT: HTML page
National Valve Museum	6V6GT: html
oldradio.qrz.ru	6V6: Brans Vademecum, MK buizen handboek
Frank Philipse home page	6V6: .gif file, 082/6/6V6.pdf, 121/6/6V6.pdf 6V6GT: 084/6/6V6GT.pdf, 093/6/6V6GT.pdf 6V6GTA: 135/6/6V6GTA.pdf
Russ Sadd home page	6V6GT: Tiff
Triode Electronics	6V6: gif1, gif2, gif3, gif4, gif5
TubeZone	6V6GT: pdf
WPS	6V6: html page

All content on this page is copyright 1997-2007 Duncan Amplification.
Please report any issues with the site through the forum.

Version: PHP release 1.06

爱乐永恒

发帖回复

返回列表


	http://www.sanyue.net/bbs 访问内容超出本站范围，不能确定是否安全


	关闭您还没有登录，快捷通道只有在登录后才能使用。立即登录还没有帐号？赶紧注册一个


	关闭选中1篇全选

帖子

6V6的三种推荐工作态，可以直接照搬引用 [复制链接]